Soft Wash Wand

Description

After putting these wands to the test over the years, we have finally decided to start producing and selling our version of the soft wash wand. All of our soft wash wands are made with the highest quality parts and built by hand by our small business.
We have found that this particular set up is the most durable and provides the best long term value for use in applying corrosive chemicals, degreasers, and acids.
The wands are fully assembled in Lakeland, FL. Each piece is assembled by hand using only the highest quality commercial grade parts. All threads are wrapped with Teflon tape and thread sealant for double the seal. The thread sealant is also applied evenly over the threads by hand so 100% of the thread is covered in sealant.
The wand will come fully assembled with a 1/2 inch ball valve, 1/2 inch barb to connect to your soft wash hose, a 1/4 inch quick connect, and adjustable soap nozzle. The soap nozzle can be adjusted for a fan spray or pencil spray to hit those spots that are too far to reach. The pencil spray can spray up to 33 feet.
As a reminder, wands will need to be flushed out with water immediately after every use. This will allow you to get the longest life out of your wand. Just remember the solution for pollution is dilution.
I would also like to note again that we have quality tested these wands prior to selling. We would not sell anything to anyone that we have not tested yet. We stand by our products. I still have the original wand on my soft wash setup and it is coming up on 2 years old now.